1. Grip Functions

1) This pro controller is compatible with Switch game consoles and also supports Windows computers.

2) No need to load driver, the handle can be used after connecting to switch host.

3) Bluetooth V3.0 wireless connection, strong anti-interference ability, stable connection signal.

4) One-button connection mode, easy to use; supports screenshot and save function.

5) Built-in 400mAh polymer lithium battery, it can be used for about 5 hours after fully charged.

6) The built-in gyroscope of this handle supports motion detection function; the built-in dual motor supports dual shock function;

7) Up to 4 wireless controllers can be connected to the host at the same time.

8) The game can be played normally when the controller is charged.

9) Ergonomic design and lightweight handle construction make players feel comfortable.

10) This controller can be updated by updating the software by connecting to a computer.



2. Key Introduction

1) HOME button * 1: Turn on the handle or run the host's command.

2) Direction keys * 1 group: up, down, left, right. Easy operation in eight directions.

3) Function control keys * 4: A, B, Y, X. Key design, finger touch operation is more sensitive and faster.

4) Left and Right Joysticks*2: Redesigned 3D joysticks, 360 degree precision operation.

5) 4 function keys: LB, RB, LT, RT. Brand new trigger and key switch design, quick response.

6) Screen capture button*1: In game, click this button to take a screenshot and save the current screen.

7) Reset button *1: Press this button to turn off the power of the handle, disconnect the handle from the host; reset to default.



3. Machine guidance

1) Connect the switch host wirelessly via Bluetooth:

A. Connect the handle to the host for the first time: Turn on the switch host, on the host's main menu interface, touch "Handle" → "Change handle" with your finger to enter the interface of host pairing mode . On the handle, long press the "HOME" button. Turn on the handle in 4 seconds, the four LED lights will flash slowly and first, and after 4 seconds will flash in a fast cycle and enter the search state. If one (or more) LEDs light up, the handle and host are successfully paired. Press the "B" button to return to the main menu.



B. Reconnect the handle to the host: Short press the HOME button to turn on the handle, the handle will be connected to the host automatically.



C. Connect the controller to the host:

a. When the handle is idle, short press the HOME button to wake up the handle, the handle and the host will reconnect automatically.

b. In the host sleep state, first press the host power button to wake up the host, and then short press the handle HOME button to reconnect to the host (in the host sleep state, directly press any button of the handle can not wake up the host).



2) Connect the switch host via a USB cable:

On the switch host main menu page, click Settings → Handle and Sensor → Per-Handle Wired Connection to open the switch host per-host wired communication function; Use a USB cable to connect the handle to the USB port of the switch host base, the LED4 will flash slowly; LED1 on the handle flashes slowly after connecting.



3) Connect the Windows computer using a USB cable:

First you need to download the X-360 driver and install it on the Windows computer; Then connect the handle to the computer with a USB cable, the four LEDs on the handle will flash slowly; After the handle driver is automatically installed, LED1 and LED4 on the handle will flash slowly, the handle can be used. Support games in X-360 mode. Please find the X-360 driver download method on the Internet.

Notes: In X-360 mode with wired connection to computer, there is vibration function and no motion detection function.



4. LED instructions
1) The four LEDs flash quickly and cyclically: the controller is searching for a Bluetooth device pairing; The controller connects to the host via Bluetooth code pairing.
2) The LED flashes quickly: the battery voltage of this handle is lower than 3.6V; When it is lower than 3.4V, the handle will turn off automatically and cannot be turned on.
3) The LED is always on: The handle and the host are normally connected via Bluetooth.


4) LED flashes slowly: the handle is connected to the host via a USB cable; When the handle is connected to the charger to charge, the four LEDs will flash simultaneously slowly and when fully charged, the four LEDs will turn off.

Remarks :

1. This controller is mainly used for playing Switch game consoles. Unless you have a Switch host, you only want to use this controller to play computer games. It is recommended not to buy this controller, please buy a special controller for computers! This controller does not support Android and MAC OS devices.

2. The charging interface of this grip is TYPE-C interface and equipped with Type-C interface

TYPE-C interface charging cable.

3. This controller was compatible with the latest version of Switch game console at the time before leaving the factory. If the switch host is upgraded again and there is no connection to the host, our factory will provide upgrade software to upgrade the handle.

4. The package contains instructions in six languages ​​(English, French, German, Spanish, Italian, Japanese). If you need Chinese instructions, please tell us online in time.

.